Request 2870 (accepted)

We truncated the diff of some files because they were too big. If you want to see the full diff for every file, click here.

You're not reviewing the full diff of request 2870 , but the diff to the superseded request 2867 (Show full diff)

Overview

Request 2870 (accepted)

Update to version 2.0

Created by enzokiel over 8 years ago
In state accepted
Supersedes 2867

Submit x265

Submit package home:enzokiel:branches:Essentials / x265 to package Essentials / x265

x265.changes Changed

@@ -1,40 +1,4 @@
 -------------------------------------------------------------------
-Fri Aug 26 16:16:31 UTC 2016 - joerg.lorenzen@ki.tng.de
-
-- Update to version 2.0
-  API and Key Behavior Changes
-  * x265_rc_stats added to x265_picture, containing all RC decision
-    points for that frame.
-  * PTL: high tier is now allowed by default, chosen only if
-    necessary.
-  * multi-pass: First pass now uses slow-firstpass by default,
-    enabling better RC decisions in future passes.
-  * pools: fix behaviour on multi-socketed Windows systems, provide
-    more flexibility in determining thread and pool counts.
-  * ABR: improve bits allocation in the first few frames, abr reset,
-    vbv and cutree improved.
-  New Features
-  * uhd-bd: Enforce Ultra-HD Blu-ray Disc parameters
-    (overrides any other settings).
-  * rskip: Enables skipping recursion to analyze lower CU sizes
-    using heuristics at different rd-levels. Provides good visual
-    quality gains at the highest quality presets.
-  * rc-grain: Enables a new rate control mode specifically for
-    grainy content. Strictly prevents QP oscillations within and
-    between frames to avoid grain fluctuations.
-  * tune grain: A fully refactored and improved option to encode
-    film grain content including QP control as well as analysis
-    options.
-  * asm: ARM assembly is now enabled by default, native or cross
-    compiled builds supported on armv6 and later systems.
-  Misc
-  * An SSIM calculation bug was corrected
-- soname bump to 87.
-- Fixed arm.patch.
-- Added libnuma-devel as buildrequires for arch x86_64 (except
-  for openSUSE 13.1, build fails).
-
--------------------------------------------------------------------
 Wed Feb  3 13:22:42 UTC 2016 - idonmez@suse.com
 
 - Update to version 1.9

x265.spec Changed

arm.patch Changed

@@ -1,25 +1,19 @@
-Index: x265_2.0/source/CMakeLists.txt
+Index: x265_11047/source/CMakeLists.txt
 ===================================================================
---- x265_2.0.orig/source/CMakeLists.txt
-+++ x265_2.0/source/CMakeLists.txt
-@@ -60,15 +60,22 @@
+--- x265_11047.orig/source/CMakeLists.txt
++++ x265_11047/source/CMakeLists.txt
+@@ -56,10 +56,22 @@ elseif(POWERMATCH GREATER "-1")
      message(STATUS "Detected POWER target processor")
      set(POWER 1)
      add_definitions(-DX265_ARCH_POWER=1)
--elseif(ARMMATCH GREATER "-1")
--    if(CROSS_COMPILE_ARM)
--        message(STATUS "Cross compiling for ARM arch")
--    else()
--        set(CROSS_COMPILE_ARM 0)
--    endif()
--    message(STATUS "Detected ARM target processor")
--    set(ARM 1)
--    add_definitions(-DX265_ARCH_ARM=1 -DHAVE_ARMV6=1)
 +elseif(${SYSPROC} MATCHES "armv5.*")
 +    message(STATUS "Detected ARMV5 system processor")
 +    set(ARMV5 1)
 +    add_definitions(-DX265_ARCH_ARM=1 -DHAVE_ARMV6=0 -DHAVE_NEON=0)
-+elseif(${SYSPROC} STREQUAL "armv6l")
+ elseif(${SYSPROC} STREQUAL "armv6l")
+-    message(STATUS "Detected ARM target processor")
+-    set(ARM 1)
+-    add_definitions(-DX265_ARCH_ARM=1 -DHAVE_ARMV6=1)
 +    message(STATUS "Detected ARMV6 system processor")
 +    set(ARMV6 1)
 +    add_definitions(-DX265_ARCH_ARM=1 -DHAVE_ARMV6=1 -DHAVE_NEON=0)
@@ -34,32 +28,21 @@
  else()
      message(STATUS "CMAKE_SYSTEM_PROCESSOR value `${CMAKE_SYSTEM_PROCESSOR}` is unknown")
      message(STATUS "Please add this value near ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE}")
-@@ -186,18 +193,9 @@
-             add_definitions(-march=i686)
-         endif()
+@@ -169,8 +181,8 @@ if(GCC)
+     elseif(X86 AND NOT X64)
+         add_definitions(-march=i686)
      endif()
--    if(ARM AND CROSS_COMPILE_ARM)
--        set(ARM_ARGS -march=armv6 -mfloat-abi=soft -mfpu=vfp -marm -fPIC)
--    elseif(ARM)
--        find_package(Neon)
--        if(CPU_HAS_NEON)
--            set(ARM_ARGS -mcpu=native -mfloat-abi=hard -mfpu=neon -marm -fPIC)
--            add_definitions(-DHAVE_NEON)
--        else()
--            set(ARM_ARGS -mcpu=native -mfloat-abi=hard -mfpu=vfp -marm)
--        endif()
--    endif()
--    add_definitions(${ARM_ARGS})
+-    if(ARM)
+-        add_definitions(-march=armv6 -mfloat-abi=hard -mfpu=vfp)
 +    if(ARMV7)
 +        add_definitions(-fPIC)
-+    endif()
+     endif()
      if(FPROFILE_GENERATE)
          if(INTEL_CXX)
-             add_definitions(-prof-gen -prof-dir="${CMAKE_CURRENT_BINARY_DIR}")
-Index: x265_2.0/source/common/cpu.cpp
+Index: x265_11047/source/common/cpu.cpp
 ===================================================================
---- x265_2.0.orig/source/common/cpu.cpp
-+++ x265_2.0/source/common/cpu.cpp
+--- x265_11047.orig/source/common/cpu.cpp
++++ x265_11047/source/common/cpu.cpp
 @@ -37,7 +37,7 @@
  #include <machine/cpu.h>
  #endif
@@ -69,20 +52,3 @@
  #include <signal.h>
  #include <setjmp.h>
  static sigjmp_buf jmpbuf;
-@@ -340,7 +340,6 @@
-     }
- 
-     canjump = 1;
--    PFX(cpu_neon_test)();
-     canjump = 0;
-     signal(SIGILL, oldsig);
- #endif // if !HAVE_NEON
-@@ -356,7 +355,7 @@
-     // which may result in incorrect detection and the counters stuck enabled.
-     // right now Apple does not seem to support performance counters for this test
- #ifndef __MACH__
--    flags |= PFX(cpu_fast_neon_mrc_test)() ? X265_CPU_FAST_NEON_MRC : 0;
-+    //flags |= PFX(cpu_fast_neon_mrc_test)() ? X265_CPU_FAST_NEON_MRC : 0;
- #endif
-     // TODO: write dual issue test? currently it's A8 (dual issue) vs. A9 (fast mrc)
- #endif // if HAVE_ARMV6

x265_2.0.tar.gz -> x265_1.9.tar.gz Changed

Build Results
RPM Lint

Refresh

Comments for request 2870 0
Comments for request 2867 1

olh wrote over 8 years ago

Why the new condition for 13.1, whats different in that libnuma variant?

Request History

enzokiel created request over 8 years ago

Update to version 2.0

olh accepted request over 8 years ago